En
De
SHAFT INFORMATION SYSTEM
LIMAX STANDARD
LIMAX COMPACT
LIMAX RED
Magnetband
Coding for ELGO LIMAX
Coding for industrial applications
Accessories
Sensor accessories
Magnetic tape accessories
Contact usProjectsAbout usCareer
OFFICE
Föhrenweg 20
9496 Balzers Principality of Liechtenstein
Elgo getconfig
Elgo cloud
Product configurator

LIMAX 33CP

Current all-in-one housing sensor
Move to
Product
Inquiry
LIMAX 33CP
About
LIMAX 33CP

Absolute position detection and safety monitoring in one housing incl. eSGC (electronic safety gear activator)

  • Measuring height up to 262m
  • Operation speed up to 10 m/s
  • CAN/CANopen Interface
  • Available with or without eSGC Activator
  • Sensor cable with 3 or 5 m
  • User defined parameter setting

‍

NEWLY AVAILABLE WITH AUTOMATIC UCM

‍

No items found.

Technical
data

Mechanical dataElectrical dataEnvironmental conditions
Move to
Product
Inquiry

Mechanical data

Measuring principleAbsolute
Repeat accuracy±1 increment
System accuracy in µm at 20°C±(1000 + 100 x L) L = measuring length in meters
Distance sensor / magnetic tapethe correct distance is guaranteed by guidance
Basic pole pitch8 mm
Sensor housing materialaluminium
Sensor housing dimensionsL x W x H = 354 x 135 x 54 mm
Necessary magnetic tapeAB20-80-10-1-R-D-15-BK80
Maximum measuring length262 m
Connections2 outlets with open wire ends for PIO and SCA cables
(plug connectors on request)
M12 4 pole male for eSGC; according to ICE61067-2-101
Sensor cable (PIO, SCA)standard length: 3.0 m (others on request)
Weightapprox. 1400 g without cable; cable: approx. 60 g per meter

Electrical data

Supply voltage 18[1] ... 30[2] VDC (stabilized). A SELV/PELV power supply must be used
Residual ripple< 100 mV
DZO rating+ 24 VDC −20 %, max.200 mA (PNP)
Reverse polarity protectionintegrated
Power inputmax. 600 mA at 24 VDC
InterfacesCAN: CANopen DS406 or DS417
Digital input voltage18 … 30 VDC for high level; open for low level
Relay contact rating
OC, SR1, SR2		·         0...230VAC (max. 250VAC), max. 2A
·         24VDC (max. 30VDC), max. 1A
·         48VDC (max. 53VDC), max. 600mA
·         110VDC (max. 120VDC), max. 250mA
each with a resistive/inductive load with L/R < 40 ms
Rating for external supply
of SGC-actuator		24 VDC, min. 18 V; max. 30 V;
constraints for connected trip coil to be observed

‍

Environmental conditions

Storage temperature−25 … +85° C
Operation temperature−20 … +65° C
Humiditymax. 95 %, non-condensing
Protection classIP54 (according to EN60529), higher on request
Interference emission / immunity EN 12015 / EN 12016
Vibration / shock resistanceEN 60068-2-6 / EN 60068-2-27, EN 60068-2-29
Others
Maximum operating time20 years
Safety relay contact reaction time< 55 ms
Solid state contact (eSGC) reaction time< 45 ms
Move to order
Product
Inquiry

Documentation